420BASE SOP :: WET SIEVING ICE WATER HASH
Here you find the 420BASE standard SOP!
SOP: Ice Water Hash through wet sieving - Step-by-Step
Here you find the 420BASE-SOP (standard operating procedure) for making Ice Water Hash through wet sieving Trim, Flower or Fresh Frozen Flower. Check out this step-by-step work instructions, divided by starting material, standard setups and post-production techniques:
-
WET SIEVING STEP BY STEP WITH A
Tools needed for the wet sieving-process
- Equipment for the Waterhash production
- Bubble bag set , work- and collection vessel and paddle
- Tools & Equipment
- Sprayer and collecting tool
- Cooling, Freezing and Climatizing Devices
- Freezer
- Consumables
- Water and ice-cubes
- ^^ The red things are mandatory!
Wet-sieving Step by step
- Mount the bubble bag set in the work- and collection vessel. ℹ️
- The bag order... Start with the bag with the finest/smallest mesh-size and end with the biggest mesh size (the working-bag) at the top.
- Fill the water in the work- and collection vessel. Temperature: ideally -4 °C. ℹ️
- The bag order... Start with the bag with the finest/smallest mesh-size and end with the biggest mesh size (the working-bag) at the top.
- Fill the bucket with ice cold water, enough to cover the bags wit it, but leave space for your ice-cubes and the plant material!
- Add the plant material to the work- and collection vessel. Temperature: ideally -4 °C.
- The bag order... Start with the bag with the finest/smallest mesh-size and end with the biggest mesh size (the working-bag) at the top.
- Fill the bucket with ice cold water, enough to cover the bags wit it, but leave space for your ice-cubes and the plant material!
- Fill the ice-cubes in the work- and collection vessel. Temperature: ideally -4 °C. ℹ️
- The bag order... Start with the bag with the finest/smallest mesh-size and end with the biggest mesh size (the working-bag) at the top.
- Fill the bucket with ice cold water, enough to cover the bags wit it, but leave space for your ice-cubes and the plant material!
- cover the plant material with ice-cubes and fill the bucket nearly to the top like that...
- Stir the plant material and the ice-cubes with the paddle for min. 5 min. and max. 10 min..
- The bag order... Start with the bag with the finest/smallest mesh-size and end with the biggest mesh size (the working-bag) at the top.
- Fill the bucket with ice cold water, enough to cover the bags wit it, but leave space for your ice-cubes and the plant material!
- cover the plant material with ice-cubes and fill the bucket nearly to the top like that...
- Wait for min. 10 min. and max. 20 min.. ℹ️
- The bag order... Start with the bag with the finest/smallest mesh-size and end with the biggest mesh size (the working-bag) at the top.
- Fill the bucket with ice cold water, enough to cover the bags wit it, but leave space for your ice-cubes and the plant material!
- cover the plant material with ice-cubes and fill the bucket nearly to the top like that...
- let everything settle a bit, so the floating trichomes have a little time to sink down...
- Pull the bubble bag set from the work- and collection vessel. ℹ️
- The bag order... Start with the bag with the finest/smallest mesh-size and end with the biggest mesh size (the working-bag) at the top.
- Fill the bucket with ice cold water, enough to cover the bags wit it, but leave space for your ice-cubes and the plant material!
- cover the plant material with ice-cubes and fill the bucket nearly to the top like that...
- let everything settle a bit, so the floating trichomes have a little time to sink down...
- pull out your first bag with the ic-cubes and the plant material now. hold it on top of your working vessel while doing so...
- ... while spraying the bubble bag set with the water and the sprayer. ℹ️
- The bag order... Start with the bag with the finest/smallest mesh-size and end with the biggest mesh size (the working-bag) at the top.
- Fill the bucket with ice cold water, enough to cover the bags wit it, but leave space for your ice-cubes and the plant material!
- cover the plant material with ice-cubes and fill the bucket nearly to the top like that...
- let everything settle a bit, so the floating trichomes have a little time to sink down...
- pull out your first bag with the ic-cubes and the plant material now. hold it on top of your working vessel while doing so...
- spray the inside walls of the filter bag while holding it on top of your bucket in order to clean them from resin sticking there... Like that its also easy to collect all the resin in the middle at the bottom of your filter bag...
- Collect the collected resin with the collecting tool. ℹ️
- The bag order... Start with the bag with the finest/smallest mesh-size and end with the biggest mesh size (the working-bag) at the top.
- Fill the bucket with ice cold water, enough to cover the bags wit it, but leave space for your ice-cubes and the plant material!
- cover the plant material with ice-cubes and fill the bucket nearly to the top like that...
- let everything settle a bit, so the floating trichomes have a little time to sink down...
- pull out your first bag with the ic-cubes and the plant material now. hold it on top of your working vessel while doing so...
- spray the inside walls of the filter bag while holding it on top of your bucket in order to clean them from resin sticking there... Like that its also easy to collect all the resin in the middle at the bottom of your filter bag...
- Well, this can be a simple debit card - or some kind of nice spoon specially made for this purpose!
- Repeat from Step #9! [Collect the collected resin wi...] until you're finished. ℹ️
- The bag order... Start with the bag with the finest/smallest mesh-size and end with the biggest mesh size (the working-bag) at the top.
- Fill the bucket with ice cold water, enough to cover the bags wit it, but leave space for your ice-cubes and the plant material!
- cover the plant material with ice-cubes and fill the bucket nearly to the top like that...
- let everything settle a bit, so the floating trichomes have a little time to sink down...
- pull out your first bag with the ic-cubes and the plant material now. hold it on top of your working vessel while doing so...
- spray the inside walls of the filter bag while holding it on top of your bucket in order to clean them from resin sticking there... Like that its also easy to collect all the resin in the middle at the bottom of your filter bag...
- Well, this can be a simple debit card - or some kind of nice spoon specially made for this purpose!
- now the other working bags... Now repeat that with all the other working bags you are using.
- Repeat from Step #1! [Mount the bubble bag set in th...] with increasing washing times until the collected resin is getting greenish. ℹ️
- The bag order... Start with the bag with the finest/smallest mesh-size and end with the biggest mesh size (the working-bag) at the top.
- Fill the bucket with ice cold water, enough to cover the bags wit it, but leave space for your ice-cubes and the plant material!
- cover the plant material with ice-cubes and fill the bucket nearly to the top like that...
- let everything settle a bit, so the floating trichomes have a little time to sink down...
- pull out your first bag with the ic-cubes and the plant material now. hold it on top of your working vessel while doing so...
- spray the inside walls of the filter bag while holding it on top of your bucket in order to clean them from resin sticking there... Like that its also easy to collect all the resin in the middle at the bottom of your filter bag...
- Well, this can be a simple debit card - or some kind of nice spoon specially made for this purpose!
- now the other working bags... Now repeat that with all the other working bags you are using.
- ...and once more! Now keep on going... Re-Mount the bags, add the plant-material again and add fresh ice-cubes. Repeat everything - maybe with longer stirring times... Keep going until the collected resin gets greenish in color...
Tools needed for the wet sieving-process
- Equipment for the Waterhash production
- Bubble bag set , washing vessel , collection vessel , paddle and bubble bag
- Tools & Equipment
- Sprayer and collecting tool
- Consumables
- Water and ice-cubes
- ^^ The red things are mandatory!
Wet-sieving Step by step
- Mount the bubble bag set in the collection vessel. ℹ️
- from small to big Add the filter-bag with the smallest mesh-size first, the step by step the bigger filter bags - and at last your working-bag with the biggest mesh-size.
- Fill the washing vessel with the water. Temperature: ideally -4 °C. ℹ️
- from small to big Add the filter-bag with the smallest mesh-size first, the step by step the bigger filter bags - and at last your working-bag with the biggest mesh-size.
- Use cold and clean water! Fill your working bucket with ice-cold water now... Leave space for plant-material and ice-cubes.
- Add the ice-cubes and the plant material to the washing vessel.
- from small to big Add the filter-bag with the smallest mesh-size first, the step by step the bigger filter bags - and at last your working-bag with the biggest mesh-size.
- Use cold and clean water! Fill your working bucket with ice-cold water now... Leave space for plant-material and ice-cubes.
- Stir the plant material and the ice-cubes with the paddle for min. 5 min. and max. 10 min..
- from small to big Add the filter-bag with the smallest mesh-size first, the step by step the bigger filter bags - and at last your working-bag with the biggest mesh-size.
- Use cold and clean water! Fill your working bucket with ice-cold water now... Leave space for plant-material and ice-cubes.
- Wait for min. 10 min. and max. 20 min.. ℹ️
- from small to big Add the filter-bag with the smallest mesh-size first, the step by step the bigger filter bags - and at last your working-bag with the biggest mesh-size.
- Use cold and clean water! Fill your working bucket with ice-cold water now... Leave space for plant-material and ice-cubes.
- Wait a bit to let the trichomes sink down...
- Drain the washing vessel through the bubble bag set to the collection vessel.
- from small to big Add the filter-bag with the smallest mesh-size first, the step by step the bigger filter bags - and at last your working-bag with the biggest mesh-size.
- Use cold and clean water! Fill your working bucket with ice-cold water now... Leave space for plant-material and ice-cubes.
- Wait a bit to let the trichomes sink down...
- Pull the plant material and the working-bags from the collection vessel.
- from small to big Add the filter-bag with the smallest mesh-size first, the step by step the bigger filter bags - and at last your working-bag with the biggest mesh-size.
- Use cold and clean water! Fill your working bucket with ice-cold water now... Leave space for plant-material and ice-cubes.
- Wait a bit to let the trichomes sink down...
- Wash the outside of the working-bags with the sprayer with the water.
- from small to big Add the filter-bag with the smallest mesh-size first, the step by step the bigger filter bags - and at last your working-bag with the biggest mesh-size.
- Use cold and clean water! Fill your working bucket with ice-cold water now... Leave space for plant-material and ice-cubes.
- Wait a bit to let the trichomes sink down...
- Pull the collected resin and the bubble bag set from the collection vessel.
- from small to big Add the filter-bag with the smallest mesh-size first, the step by step the bigger filter bags - and at last your working-bag with the biggest mesh-size.
- Use cold and clean water! Fill your working bucket with ice-cold water now... Leave space for plant-material and ice-cubes.
- Wait a bit to let the trichomes sink down...
- ... while spraying the bubble bag with the sprayer with the water.
- from small to big Add the filter-bag with the smallest mesh-size first, the step by step the bigger filter bags - and at last your working-bag with the biggest mesh-size.
- Use cold and clean water! Fill your working bucket with ice-cold water now... Leave space for plant-material and ice-cubes.
- Wait a bit to let the trichomes sink down...
- Collect the collected resin with the collecting tool.
- from small to big Add the filter-bag with the smallest mesh-size first, the step by step the bigger filter bags - and at last your working-bag with the biggest mesh-size.
- Use cold and clean water! Fill your working bucket with ice-cold water now... Leave space for plant-material and ice-cubes.
- Wait a bit to let the trichomes sink down...
- Repeat from Step #9! [Pull the collected resin and t...] until you're finished. ℹ️
- from small to big Add the filter-bag with the smallest mesh-size first, the step by step the bigger filter bags - and at last your working-bag with the biggest mesh-size.
- Use cold and clean water! Fill your working bucket with ice-cold water now... Leave space for plant-material and ice-cubes.
- Wait a bit to let the trichomes sink down...
- same now with all the other filter bags...
- Drain the water from the collection vessel.
- from small to big Add the filter-bag with the smallest mesh-size first, the step by step the bigger filter bags - and at last your working-bag with the biggest mesh-size.
- Use cold and clean water! Fill your working bucket with ice-cold water now... Leave space for plant-material and ice-cubes.
- Wait a bit to let the trichomes sink down...
- same now with all the other filter bags...
- Repeat from Step #2! [Fill the washing vessel with t...] with increasing washing times until the collected resin is getting greenish.
- from small to big Add the filter-bag with the smallest mesh-size first, the step by step the bigger filter bags - and at last your working-bag with the biggest mesh-size.
- Use cold and clean water! Fill your working bucket with ice-cold water now... Leave space for plant-material and ice-cubes.
- Wait a bit to let the trichomes sink down...
- same now with all the other filter bags...
- Convert the SOP units:
- show the temperatures as